|
You did everything you could to build the best rocket.......
You used the best materials you could get,,,,,, You even researched which adhesive to use........ |
|
Now use the best recovery harness.....
All stitching / sewing is done with Kevlar thread......
The strength and resiliency of these harnesses still amazes me.......
All stitching / sewing is done with Kevlar thread......
The strength and resiliency of these harnesses still amazes me.......
New material / product alert !!!! 1/4", and 3/8" Tubular Kevlar
There's been a gap in our product line with the smaller / lighter Kevlar materials...
Not anymore,, we now have 1/4" and 3/8" Tubular Kevlar ..
Now they'll be no more guessing at what material fits a particular size airframe..
Our 3/16" Tubular Kevlar is just perfect for those really small airframes
where space is at an absolute premium-- 38mm, 54mm and 2.6"....
Our 1/4" Tubular Kevlar is just perfect for 3" airframes..
Our 3/8" Tubular Kevlar is just perfect for 4" airframes..
Our 7/16" Tubular Kevlar is just perfect for 5" and up airframes..
No more gaps in material size..
No more guessing which harness for my current rocketry build..
The 3/16" Tubular Kevlar is now available as "standard" in 15 ft or 20 ft,
so it'll fit those tight 38mm airframes all the way up to 2.6" airframes..
The 7/16" Tubular Kevlar 3 loop booster harnesses will now be 30 ft "standard",,
while the 7/16" Tubular Kevlar 2 loop payload section harnesses will still be 25 ft "standard"..
This is like getting custom harnesses at "standard production run" prices..
These new materials are just perfect for so many applications..
They're super small, but super strong,, and are also abrasion resistant...
These harnesses are certain to become an absolute favorite...
Wait till you see these harnesses,,, they're just as cool as it gets....
There's been a gap in our product line with the smaller / lighter Kevlar materials...
Not anymore,, we now have 1/4" and 3/8" Tubular Kevlar ..
Now they'll be no more guessing at what material fits a particular size airframe..
Our 3/16" Tubular Kevlar is just perfect for those really small airframes
where space is at an absolute premium-- 38mm, 54mm and 2.6"....
Our 1/4" Tubular Kevlar is just perfect for 3" airframes..
Our 3/8" Tubular Kevlar is just perfect for 4" airframes..
Our 7/16" Tubular Kevlar is just perfect for 5" and up airframes..
No more gaps in material size..
No more guessing which harness for my current rocketry build..
The 3/16" Tubular Kevlar is now available as "standard" in 15 ft or 20 ft,
so it'll fit those tight 38mm airframes all the way up to 2.6" airframes..
The 7/16" Tubular Kevlar 3 loop booster harnesses will now be 30 ft "standard",,
while the 7/16" Tubular Kevlar 2 loop payload section harnesses will still be 25 ft "standard"..
This is like getting custom harnesses at "standard production run" prices..
These new materials are just perfect for so many applications..
They're super small, but super strong,, and are also abrasion resistant...
These harnesses are certain to become an absolute favorite...
Wait till you see these harnesses,,, they're just as cool as it gets....
We will be away from Thursday 04/04/2019 through
Monday 04/08/2019 to attend the MDRA launch
"Red Glare" in Price, Maryland..
Any orders received during this period
will be shipped as soon as we get back..
Come on out to the field and launch a few with us !!!
Monday 04/08/2019 to attend the MDRA launch
"Red Glare" in Price, Maryland..
Any orders received during this period
will be shipped as soon as we get back..
Come on out to the field and launch a few with us !!!
Wow, we are so excited to announce a new product line / manufacturer affiliation with Top Flight Recovery....
First,, the back story..
I have always loved the Top Flight line of Ultra X form chutes to be used as drogues..
They're super robust, just as tough as nails, rock solid and built like a brick outhouse,, lol...
I haven't gotten to use them on many of my set ups because they started at 24"--
too big for a drogue for me until you get to a 70 lb. or more rocket..
We are so proud to announce that we are not only carrying the Top Flight Ultra X form chutes but they're being made in smaller sizes exclusively for Onebadhawk Recovery Harnesses !!!!!
We have them in stock in sizes 12", 16", 20", and 24" !!!!!!
Just wait till you see and feel the weight and heft of these small chutes !!!!!!
They are just absolutely made to be dragged through the air at 95 fps !!!!!
As always,, just let us know what you'd like in an email,, and we'll get it right out to you....
First,, the back story..
I have always loved the Top Flight line of Ultra X form chutes to be used as drogues..
They're super robust, just as tough as nails, rock solid and built like a brick outhouse,, lol...
I haven't gotten to use them on many of my set ups because they started at 24"--
too big for a drogue for me until you get to a 70 lb. or more rocket..
We are so proud to announce that we are not only carrying the Top Flight Ultra X form chutes but they're being made in smaller sizes exclusively for Onebadhawk Recovery Harnesses !!!!!
We have them in stock in sizes 12", 16", 20", and 24" !!!!!!
Just wait till you see and feel the weight and heft of these small chutes !!!!!!
They are just absolutely made to be dragged through the air at 95 fps !!!!!
As always,, just let us know what you'd like in an email,, and we'll get it right out to you....
We are so proud to announce the addition of a
new product line and now we have 2 !!!
Onebadhawk Recovery Harnesses is now a full line distributor of the baddest bestest coolest rocket loads
and hardware there ever was...
new product line and now we have 2 !!!
Onebadhawk Recovery Harnesses is now a full line distributor of the baddest bestest coolest rocket loads
and hardware there ever was...
I have been impressed with Jolly Logic for some time,,
but this new chute release just knocked it out of the park...
So While we're at it we are now a full line distributor of
Jolly Logic Altimeters and Chute releases...
Best of all,,, Jolly Logic always ships for Free
but this new chute release just knocked it out of the park...
So While we're at it we are now a full line distributor of
Jolly Logic Altimeters and Chute releases...
Best of all,,, Jolly Logic always ships for Free
The result of a high speed separation...
1" Tubular Nylon "Y" harness w/ a 5/16" swivel,,
Made for Michael H. out of Derby Kansas...
|
The result of a high speed separation...
7/16" Tubular Kevlar X 35 ft,, On the fwd side,,
3rd loop @ 30" w/ a 24" Nomex blanket aft of the loop
and on the aft side a 30" "Y" for the booster's eye's.. Made for Russ W. out of Menomonee Falls, Wisconsin..
|
Onebadhawk Hardware!!!
Onebadhawk Recovery is quite proud to announce the addition of hardware
to our lineup of quality recovery gear..
And just as you've come to expect from Onebadhawk,,, Nothing but the best......
All of our hardware is solid stainless steel--- polished !!!
If something must withstand the corrosive environment of repeated BP charges burning
in close proximity,, what material would be better...
A new addition to our Hardware line-- Stainless Steel U- Bolts
And in the perfect sizes to set up bullet proof avionics bays...
A new addition to our line-up Light weight Kevlar materials
There is also a new addition to the most extensive harness line-up in rocketry....
Light weight Kevlar... This is a very thin, light Kevlar..
Fantastic material for those small to medium light low power rockets,,
and 1/8" Tubular Kevlar for those mid power birds and those rockin mid power flights...
There has never been such an extensive harness selection before
and we are quite excited to be carrying it...
As with everything else here,, it's part of our philosophy,,, Nothing but the Best !!!!!!
Onebadhawk Recovery is quite proud to announce the addition of hardware
to our lineup of quality recovery gear..
And just as you've come to expect from Onebadhawk,,, Nothing but the best......
All of our hardware is solid stainless steel--- polished !!!
If something must withstand the corrosive environment of repeated BP charges burning
in close proximity,, what material would be better...
A new addition to our Hardware line-- Stainless Steel U- Bolts
And in the perfect sizes to set up bullet proof avionics bays...
A new addition to our line-up Light weight Kevlar materials
There is also a new addition to the most extensive harness line-up in rocketry....
Light weight Kevlar... This is a very thin, light Kevlar..
Fantastic material for those small to medium light low power rockets,,
and 1/8" Tubular Kevlar for those mid power birds and those rockin mid power flights...
There has never been such an extensive harness selection before
and we are quite excited to be carrying it...
As with everything else here,, it's part of our philosophy,,, Nothing but the Best !!!!!!
The T Shirts are finally in.....
|
And they are just
too cool..... |
New colors are in stock now.....
The best harnesses,,, just got cooler..... |
|
By completing any purchase you agree to the terms in our user agreement.